1999 Isuzu Rodeo "power steering sensor leaking plug" Questions

...Power steering pump pressure switch connector Front cover Spark plugs and wires Camshaft Position (CMP) sensor Valve cover Timing belt. Refer to the Timing Belt unit repair section. Timing belt idler ...

Power steering pump Intake manifold Crankshaft pulley Front cover Timing belt. Refer to the Timing Belt unit repair section. Valve cover Rocker arms Camshaft Cylinder head Cylinder head bolt loosening

...power steering pump is a wire....disconnect it and undo battery for 30 seconds.....see if this fixes it.....the swith in the power steering pump is supposed to bump idle by 200 on full turns....f it ...

power steering pump bracket. Torque the mounting bolts to 34 ft. lbs. (46 Nm). Install the cylinder head covers. Install the timing belt and the auto tensioner (pusher). Torque the mounting bolt to 14

power steering pressure sensor I have a major leak coming out thru this pressure sensor switch (Power Steering). I am looking for its part number since it does not show up anywhere. I read that a guy ...

Power steering started acting horrible, hig whining and minimual fluid loss. Over the next night, i woke up to find the driveway covered in PS fluid. The Pump will not hold fluid, dumping everything I

power steering pump replaced after replacing the power steering pump, which did nothing to help the 5 miles per quart guzzle of power steering fluid, my car now seems to misfire. it can barely hold an

...manifolds that leak either through the rubber gasket, a crack in the plastic or a little plastic plug that is on the passengers side of the vehicle behind the power steering pump. Hope this ...

...power steering sencer Not difficult to do. I had to do this for my 2002 neon. Go to your local parts store and buy a "power steering pressure switch"...should be around 20-25 dollars. It's located ...

power steering pressure switch Dodge Durango 2001. Have code P0551 and looking for this switch to maybe replace it. Many posts saying that if it is leaking it should be replaced. It's a $10-$15 switch