2000 Isuzu Rodeo "finding tdc" Questions

where can i find the TDH mark Do you mean TDC top dead center? Should be on the crankshaft pulley or balancer like a groove in the pulley or balancer.

how do I find tdc on #2 cylinder when timing belt breaks Timng belt installation involves the #1 cylinder, not the #2 cylinder. Below is the picture of the timing marks for the 4 cylinder and the 6 ...

I need to find the timing (TDC) marks for my 95 isuzu rodeo. I had to replace the front main seal gasket. I had to pull the harmonic balancer to get to the seal. I put everything back together & ...

timming problems I have a 96 rodeo when i got the truck i put a head gasket on how do i put the timming belt on the cam pulley the belt was off of it when i got it 4 cylinder or v-6? Try and get the ...

yesterday i changed out the distributoe on my 1991 isuzu rodeo and now its backfiring and wont start. the timing is in check and the distributor firing order is in check. Is there anything else that ...

Testing camshaft sensor on 1995 isuzu rodeo Cam sensor is basically a coil, so use a ohm meter to test for continuity, but be aware, it can test good when cold and still fail as it heats up and a ...

engine shut off while driving down the interstate. My 2004 izuzu had no prior problems before this. The engine shut off on the interstate and would not restart (3 1/2 weeks ago) It has been in two ...

1999 Blazer Distributor replacement. How do I find TDC with harmaonic balancer marks. I see two marks. One should be TDC compression and the other should be TDC exhaust. What mark do I need to align ...

find tdc on 2003 ford ranger find tdc using teeth on crankshaft pulley Sorry can't help with specific model-related information but in the absence of a manufacturer's tdc mark using a dial gauge on ...

engine valve timing To find TDC remove number 1 plug and place the crank pulley timing mark on tdc . Using a piece of soft wire etc move the crank back and forth and determine when the piston is not ...