...V6 3.2l thermostat replacement Whose the genius that decided to put the thermostat in the center of the engine! How is it supposed to be removed? Well, as you said, Isuzu engineers are not the ...
...v6 3.2L 4x4 ..i just replaced the oil cooling hoses(upper and lower)..now when the engine warms and the thermostat opens coolant appears to be leaking from between the motor and the transmission.. i ...
...replace thermostat, not getting it backwards, or failing to get bleed hole (aka. jiggle pin) up hill. 5: reassemble the housing with proper sealant or gaskets the match you unstated engine. nor year, ...
...replace thermostat in 1999 isuzu amigo v6 The picture of engine in the haynes book looks nothing like my engine. Trying to replace the thermostat. Are there any instructions to print out? if you have ...
Question about Isuzu Rodeo
...Replace the Radiator cap and the thermostat and if needed have the radiator cleaned out and use a proper mix of anti-freeze Isuzu recommends. x2 do not do that. NO STAT, do NOT. (replace it its dirt ...
Question about Isuzu Rodeo
...v6 LT. It threw a radiator, found a water pump issue & replaced it thermostat has been replaced and it is still over heating when driven but not on idle please help heater core is plugged the heater ...
Question about Isuzu Rodeo
...thermostat and broke the little censer while i was at it. Hi,im not shore,I think it might be temp-gage, if you warm car up a bit, then take wire off broken switch, get some one to hold the wire on ...
Question about Isuzu Rodeo
...v6 where is the bi pass hose? Truck running hot upper and lower hosts been replaced and thermastat and thermostat housing been replaced.. Its leaking from underneath hose by water pump My rodeo had a ...
replace the thermostat in my daughters 2002 Isuzu Axiom. Is it true that you have to take off the intake manifold in order to even find it? Is it better to let the shop do it? Any help is appreciated.
...engine block under the nozzle fixture. Be sure to replace the thermostat with the proper replacement part (may be difficult to find) and put on new gaskets for the intake manifold before replacing
1,196 questions posted
Usually answered in minutes!
832 Questions
814 Questions
720 Questions
623 Questions
547 Questions