2003 Jeep Grand Cherokee "install ring oil filter cap" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...ring is positioned into fuel return fitting in filter/regulator. 3. Apply a small amount of clean engine oil to o-rings. 4. Position filter/regulator to body and install 2 bolts. Tighten bolts. Refer ...

Ad

...oil filter on the 2002 tdi does the bottom (small) o ring go on the bottom or upper groove of the filter holder shaft? on the bottom of the oil cap stick there are 2 places it seems possible to put ...

Ad

Question about Jeep Grand Cherokee

2 Answers

...INSTALL A NEW O RING INTO THE GROOVE IN THE CAP.THEN INSTALL THE NEW FILTER ELEMENT IN THE CAP AND INSERT BOTH INTO THE FILTER RECEPTACLE.SCREW DOWN THE CAP AND TIGHTEN IT SECURELY. WHEN ALL IS DONE ...

Question about Jeep Grand Cherokee

2 Answers

...Install new O-ring 5. Apply lihgt film of clean diesel oil to cap O-ring 6. Load filter/cap into housing. 7. Tighten cap to 25 ft. lbs. torque. Do NOT over-tighten. if its a gas engine there iss no ...

...oil before installation. This could be why it is leaking now. It may have been overlooked. Once the o-ring is seated drop in the new filter and replace the housing cap. Tighten the cap to 18 ft lbs. ...

Question about Jeep Grand Cherokee

5 Answers

...oil filter leak I have replaced gasket o-ring on cap twice. Car will not leak for short period of time and then leak re-occurs. Is this a trademark of this model. Problem started when grease monkey ...

Question about Jeep Grand Cherokee

1 Answer

...ring on the filter that butts up against the block when thefilter is screwed and tightened into place. (5) Now that the new filter is ready to be used go ahead and put drainplug back into vehicle oil ...

...mm socket and it's on the passenger side - back side of the engine. unscrew the cap. replace the o-ring and be sure to lubricate the o-ring before installation. install new filter and screw cap back ...

Question about Jeep Grand Cherokee

1 Answer

...of dirty oil in there. Be sure to install a new O ring and oil the O ring. Don't use aftermarket filters that are filter and cap all in one if you can help it. Tighten the cap fully after

...ring seal in the cap's screw thread, then install the new filter element onto the cap. Reinstall the cartridge into the casing and tighten the cap. You are done and good to go! Thank you for using ...

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

1,568 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...