Tail gate wont open. Handle is free and wont pull mechanism to open it. Struggling.... These rear hatches have a cheesy rod and clip setup. You have to remove the panel from inside, you have to loosen
...tail gate to open remote and key entry, lock can be heard when opening or closeing child locks?? active? if not the lock is jammed. fix it , by finding cause of jam (rust) or replace parts that are ...
back in. Any ideas? Open tail gate. Use the access square inside - pull cable to open tail gate. Remove interier panel - 2 bolts plus 2 screws (2 bolts on handle and 1 screw each side), pull remainder
...holding the light panel to the tail light assembly remove either or and you will have access to the three bulbs on that light panel, replace the burnt one and follow the same intrunctions to put
...back of your truck and remove the inside panel of the tail gate to access the latchs. Once you get in there, you can check operation and make the repairs you need to get your tail gate working again. ...
...tail gate latch and repair on 1995 GMC pick , latch was over loaded you need to remove the inside gate panel or sometimes you can pull it back far enough to gain access to the latch and pry it =open ...
tail gate open. The key turns in the lock about 1/4 turn both ways but nothing happens. Bad news, probably rusted like the one I had, you have to remove the panel from inside by prying the little push
...back doors and rear tail gate door My remote unlocks the doors, but when I push the remote to lock the doors only the front doors lock. The back seat doors and the tail gate door does not lock. The ...
Question about Jeep Grand Cherokee
...FRONTIER AND I HAD TO REMOVE BEDLINER TO GET TO THE SCREWS. NOT A VERY BIG OPENING ON THE BACK OF THE LIGHTS. there should be 1/4 panels on the inside corners of the tail gate, they should be in ...
...back of the tail light and it will pop out. (note there are 2 spring loaded wedges so it will go slowly) Push out evenly and disconnect the plug. With it out, there is a retaining clip just unclip it ...
1,568 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions