1995 Mercury Mystique "outboard" Questions

My Mercury outboard 135 hp from 1986 jumps from 1000 rpm to 1400 rpm. It is not the spark plugs or ignition spoils (Have disconnected each once at time and there is no difference) The twoo boxes are ...

I have a early 80's mercury 7.5 outboard with 60 psi compression in both is that too low? I have good spark and fuel, installed new wiring any advice? What should the compression be on a Mercury ...

What is the torque specification head bolts bolts for a 70 horsepower Chrysler Outboard I have a 1986 Chrysler 70 hp outboard trying to find out the torque specifications for the head bolts Some help ...

Suzuki DT40CR Outboard stuck in down position 1988 DT40CR Suzuki outboard is stuck in the full down position feels like it's mechanically locked. No amount of pulling, jiggling, prying will move it. ...

I have a late 70s 28hp Mariner Outboard, appears shift linkage has broken just below the motor where it connects to the rod that goes to the foot. How do I repair it with out moving the motor? talk ...

...of falling apart then you could possible push it by hand if the inboard joint is bad and not the outboard joint next to the wheel. With the outboard broken there is a very strong posibility the if ...

...bolt from the support bracket. Loosen the 2 fascia to fender bolts from under the fascia. Pull the outboard end of the front fascia straight outboard until it disengages from the fender attachment ...

...when steering to the right. Check your front brakes. Be sure to check the inboard pads, not just outboard. We have seen many time the outboard pad looks good, but the inboard pad is falling

what is the fuel mixture for a 9.9 mercury outboard motor? With modern oils all 2 cycle engines (if it is a 2 cycle) can be safely mixed at 50:1. Most auto parts stores will carry the proper 2 cycle ...

what are the torq specs on the 6 bolts holding the outboard on and torq specs on the prop? its a 1990 mercruiser with alpha outboard You are in the car and truck category, please repost in the correct