1996 Suzuki Sidekick "clutch change" Questions

I changed the clutch master cylinder and the clutch slave cylinder on my 97 sidekick and I still have no pedal You have to bleed the system.

clutch when engaged. I change my slave-cylinder 1 year ago. It turned out to be a broken metal clip at the end of the clutch assembly under the dash.I bled the slave-cylinder yesterday twice. Is there

clutch pedal and change gears do i need to replace the clutch/ you did not say how long (time or miles) it took to damage the cable. did you lube the cable, each time? replaced? and yes, if the collar

change it. Assuming you're talking about a clutch slave cylinder - it's on or near the transmission. I don't know about Sidekicks in particular, but the slave cylinder operates a component (the clutch

...the car off, put it in gear and then start the car.The car jumps when I start it like the RPM's are too high. What's wrong? you have to change the clutch syncronizer... it comes in the clutch

i'm looking to buy a 1995 Suzuki Sidekick with a bad clutch, i want to know if there is a way to start it to see if the engine even runs before i buy it? thanks, Rod yes, put it in neutral, and push ...

...change its function (e.g. switch between 4x2 and 4x4) If this happens, refer to a repair shop.The clutch is designed to smoothly disconnect the engine from the rest of the drive-train.The clutch ...

...clutch plate and the pressure plate. Use the alignment tool. Bolt it all back to proper torque spece. You will have to ask at the auto parts place for the torque specs. Oh yea, you will need a torque ...

problems shifting Recently I had the clutch replaced, as well as the clutch cable and firewall. I'm having problems shifting, especially from 1st to reverse or shifting down gears. I had this problem ...

the clutch master cylinder loosing fluid you can add fluid and pump the clutch back up again but it does not last long. I don't see any leaks so i bought a new slave and master to replace it. However ...