1997 Jeep Wrangler "valve timing answer" Questions

Ad

Question about Jeep Wrangler

1 Answer

...valve timing (not ignition timing)? Essentially, since the valves and distributor are both driven by the camshaft (via the timing chain), both are equally affected by anything that happens to the ...

Ad

Question about Jeep Wrangler

3 Answers

the car will not idle and keep dying Badidle could be a vacuum leak egr valve stuck on idle air conttol Tune up, air filter, fuel filter? When was the last time? can be over 50things. tune up's ...

Ad

Question about Jeep Wrangler

2 Answers

...valve, overadvanced ignition timing, engine overheating, carbon buildup in the combustion chambers, or low octane fuel.Hope this helps; also keep in mind that your feedback is important and I`ll ...

It idles fine at 700rpms when initially cranked, but after driving it for a few minutes, it goes up and stays around 2000rpms, when taken out of gear. Why won't it go back to the initial normal rpms? ...

Question about Jeep Wrangler

3 Answers

...valve on the throttle body controls idle ,after time it gets sluggish due to fuel vapors leaving deposits ,pull off the throttle body and clean it with a can of throttle body cleaner,should do the ...

... also the EGR stuck open (if it has one) no engine stated. will stall. as will stuck closed ISC air valve. no air, at idle it will stall. we clean the ISC if my fast right foot proves the stall is ...

...timing needs adjustment. In most cases with fuel injection, there could be a leak around the o-rings for the injectors, there could be a leaky injector, your oxygen sensors could be bad, or even ...

answer.....but, it took me a few months to find out what the codes mean  for that car. BTW i drove the car for two years  with code p0171 and poor fuel economy before finally digging into it

Question about Honda Cars & Trucks

1 Answer

...timing belt, and is an interference engine. see Gates belt, dot com and read the ecatalog on your unstated engine. see it? if it says yes, that means , bent valves or worse. answer this, how many ...

answer your question. The 2-0 dual cam engine is a interference engine. This means if the engine jumps time at the timing belt. It will bend the valves. As for the timing marks on the camshafts. Their

Not finding what you are looking for?
1997 Jeep Wrangler Logo

765 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...