...LOW VOLTAGE. PUT A VOLTMETER ON THE BATTERY WHILE TURNING THE KEY IN THE START POSITION. IF THE VOLTAGE DROPS BELOW 8 VOLTS, THAT IS TOO LOW. BATTERY NEEDS TO BE CHARGED OR REPLACED & TERMINALS ...
Question about Lexus GS 300
...voltage is low and will remain off until the battery control module see a stable battery voltage for a certain amount of time. Once battery voltage is stable, the a/c should start working again, same ...
Question about Lexus GS 300
...low beams don't turn on and the daytime running lights aren't working as well. I have checked all the fuses and they aren't burnt. What else can I check? The diagram is left rear turn. For the turn ...
low fuel pressure or an injector problem. Maybe they aren't pulsing. You have voltage to the injectors; now check the ground circuit: Use a test light and clip the lead to the POSITIVE post of battery
...got it home I turned the car off, but it wouldn't start. Then i got a jump, it ran for about 10 minutes, then did the same thing... please help! It sound like an alternator problem , low
...voltage gets low. I would have the battery checked. Then perform this step to clear the light. If the light does not clear, then you have a hard code and the code should be checked so the proper ...
Question about Dodge Cars & Trucks
...voltage is low, the connection should be resoldered or replaced. Common Problems with Chevy & GMC Pickup Trucks ' 1988-2013 https://raybuck.com/common-issues-with-full-sized-gm-pickup-trucks/2022 ...
...voltage drops too low. If you have a voltmeter, check the voltage at the battery with the engine running. It should be around 14 volts. If it is much less, remove the alternator and have it tested at ...
...network communication problem with the ECM, first check the battery voltage for a low voltage, start the car and recheck it should be about 13 to 14 volts if it is ok you may need a dealer. Good
...for gas leaks There can be numerous reasons for a blinking AC light / check AC. Low pressure, low voltage, temperature too high/low, sensor failure... I'd suggest have it scanned for errors
231 questions posted
Usually answered in minutes!
222 Questions
91 Questions
37 Questions
20 Questions
6 Questions