1997 Jeep Grand Cherokee "ground wire tail lights" Questions

...ground wire. I would start by checking all the tail light wire connections and ground wires located in the back of the vehicle. I have seen ground wires held together by a screw attached to a plastic ...

...ground. Check the sockets for signs of burning or corrosion. There is a plug in the left rear quater panell. If you have no power check the corrisponding wire at that connector. The wires splice ...

wire and black probe on the other). If you get a reading about 12 Volts (or -12 depending on which wires the black and red are on) the problem is the tail light or bulb itself. Thank you for this post

...ground wires - black wires screwed to the body. Look under the hood, Pull the headlight assemblies out if necessary and find those little guys. They are generally close to the light. Follow the wire ...

...ground problem or shorted wire.Check for bad grounds rusted or broken. I had the same problem, inside the light housing are three contacts, one single and two contacts together, the single one lost ...

...scoket.you will see 2 or 3 little ground wire arond the socket ,take a piece of sand paper and sand them a little then bend them out just a frog hair and put it back together,,,,,,,,,,,,works on ...

...ground and tail light to tail light but i have no brake light wire on the harness so my brake lights dont work You need to purchase the trailer wire kit that has a solid state module that will allow ...

ground ( negative wire). Also some cars use the car body as the ground connection. I think the reason the tail light works when the brake light is off is because the tail light is grounded through the

...? If so check the ground wire for that socket and reestablish ground path. If you can not find the problem you can tap into the ground wire with a scotch lok connector and run your own wire to

...the ground wire and use the sharp point to the 2 wires. one will be the tail light the other will be the turn sig and stop light. its easy to do. go for it you can do this... good day and good luck ...