1999 Jeep Grand Cherokee "hours replace power steering pump" Questions

replace power steering pump ? Im not to good at "SHOP PRISES" but Flat Rate Says 1.3 hours @ $65.00 To $80.00 Per hour + Part markup Auto Zoo about $150 for a rebuilt pump and 1.5 hours labor, so $300

...replace the power steering pump in a jeep grand cherokee 4.7 1999 Pretty simple unbolt and bolt back on operation. One thing though is most rebuilt pumps come with no pulley and you will need a ...

...replace the pump again, but I was curious if there is something else going on. The fact that it quieted it makes me think it has to be the pump. try turning the wheel fron side to side while the car ...

...power steering pulley, backside of belt ,under idler pulley, inside of belt over a/c compressor, over alternator, backside of belt around fan pulley, inside of belt around crank pulley, backside of ...

...power to the coil. Good luck. i ran into this once on same vehicle put new fuel pump in vehicle came back next day not running again after hours of trouble shooting the o2 sensor wire is in between ...

...power steering pump. If the Jeep is an 8 cyl. the tensioner is on the pass. side of car. I have a 99' Grand Jeep Cheerokee Laredo 8 cyliner all time 4 wheel drive that has an idle problem. The idle ...

...Power Steering mount - these go through the W/P case to the block. You may also need to losen the top PS bolts so the PS Bracket can be loose at the W/P case. 17) Wiggle the W/P out from under the PS ...

...hours to replace a power steering pump? Just bought this car and it's steering is hard. The guy said he replaced the steering fluid reservoir, fluid is full, thinking the pump is gone. Your thoughts ...

...replace my VSS and power steering pump. He also said replacing VSS would take 3 hours and charge $300 for the VSS alone and another $300 for the pump. I appreciate your suggestion. first of all, the ...

replace power steering pump. How much time would you expect an experienced mechanic to need. An honest mechanic if he had the replacment part at the ready would take 1 to 1.5 hours to do this job, its