2003 Acura 3.2TL "tl engines light" Questions

...TL ABS light comes on and off and causes the engine light to click on at a red light. Engine acts like it won't to cut out when the ABS light goes on and off. Whats wrong? FYI, ABS ligh 96 Acura ...

TL changed the fuel pump car runs good but now the TCS light and check engine light are on. the TCS light will come on any time the check engine light comes on. Pull codes from the engines computer to

...tl To reset the Engine Light, you'll need a OBD II scanner. It cost about $100. Or, you can go to you local auto-parts store. Most stores will turn the Engine Light off for you for free using their ...

...fouth and not seeing the proper gear change VSA light appears. I have a 06 Acura tl and my vsa light came on with my check engine light. Now it won't start :-( Can anyone tell me what the problem

...tl 3.2 To reset check engine light... Disconnect the ground (black wire) from the battery. Wait for at least a minute for the computer to reset, then reconnect the ground. Start your car, and the ...

...3.2 tl check engine light wont go off My check engine light wont go off no matter what unhook batterie 4 several min and hook back up if the light reappears take 2 auto zone have them test its ...

tl drl light came on along with the check engine light. my car is 6 speed and when it came on i lost most power while shifting Always, if the check engine light is on, get it scanned first to see what

...light on Acura TL 3.2 1999 How do I turn off the Check Engine light on Acura TL 3.2 1999 You can turn off the Check Engine light by either disconnecting the battery or by using a code reader to clear ...

...tl stall in the morning and engine light on #p0301 and 0303, after warm up is better, spark plug changed. any ideas, thx, mic the P0301 means Cylinder 1 Misfire Detected, and the P0303 means Cylinder ...

...Tl, to check engine light with meter The OBDII connector is located in the center console just behind the ashtray. There is a plastic cover that must be removed and you will find the connector behind ...