...Brake Disc (Rotor) > Removal & Installation Removal & InstallationRaise and support the front of the vehicle on jackstands. Remove the front wheels. Remove the caliper assembly; do not let ...
...not let brake caliper hang by the brake line. push brake caliper piston in with c clamp or piston tool. replace pads, reassemble brake caliper. while brake caliper is off check disc rotor for
...disc brake rotor mounting face. Use care to avoid damage or interference with disc brake caliper (2B120) , front disc brake rotor shield (2K004) or front wheel knuckle (3K185) . Remove rear brake pin ...
...disc brake caliper to the steering knuckle. Remove the disc brake caliper from the knuckle and brake rotor. Hang the caliper out of the way using a wire hanger or cord. Do not support the caliper by ...
...disc brake caliper pin bolts. Lift the disc brake caliper from the anchor plate and position the caliper out of the way. Do not disconnect the fluid line. Inspect the disc brake caliper for leaks and ...
disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely. 4. Remove the disc brake rotor. 5. Remove the wheel speed
...disc clean pad carrier and refit fit new pads put some copper grease on back of pads push in caliper piston slowly using large grips or g clamp fit and secure caliper pump up brake pedal check brake ...
DISC BRAKE ROTOR RETAINING SCREWS IF EQUIPPED.IF THE ROTOR WILL NOT EASILY PULL OFF,SCREW TWO 8MM BOLTS INTO THE DISC BRAKE REMOVAL HOLES AND TURN THE BOLTS TWO TURNS AT A TIME TO PRESS THE ROTOR FROM
...BRAKE LINE HOSE UNLESS YOU PLAN ON REPLACING THE CALIPERS! On the back of the Caliper are two (2) guide pin bolts holding the Caliper over the Rotor. There two (2) types of rear disc brakes on your ...
1,021 questions posted
Usually answered in minutes!
1,130 Questions
1,041 Questions
811 Questions
722 Questions
687 Questions