...motor is located on the driver side panel directly behind the lift arm. First you will have to take the safety belt bolt out. After you get the plastic piece free from the body you will have to take ...
motor can be heard, but nothing else happens. The door CAN be opened manually. check the gate suports.. its very common for them to rust at the ends and cause them to bind that will not allow the gate
Lift gate does not lock with key fob or with manual switch on the door. sounds like you have a bad lock motor in the lift gate replace lock and check with fob
Question about Cars & Trucks
gate motor be out of time. Gate will power open though. There are switches on both ends of the course of the motor, if one fails it will only work on the side that´s ok. That´s why it opens but do not
Question about Cars & Trucks
...gate motor working, but the gate does not open or close. you can open and close the gate by hand. it is as if the gear does not engage Your manual override is active. This disengages the gearbox from ...
Question about Chrysler Town & Country
...gate to try to manually get it to roll up. Its connected by cables to the motor. motor seemed to get warm after holding switch trying to get window to go up?? I just need it to go up and I will be ...
Question about Cars & Trucks
...gate: for a 1/2 hp motor, set dip switch A4 to on. For a 3/4 hp motor, set the dip switch B8 to on. Hope this helps. May want to also check if leaves or other dirt has gotten into the mechanism. Hope ...
the gate will not open. sounds like maybe the motor,wiring or a belt if it belt driven, some are and some are all mechaincal' also first thing is to check linkage on lock on that gate. hope this helps
...Gate motor I ensured that all the fuses are still OK my rail is Clea. That the gate wheels run on aswell I even changed the plug in transformer yet the motor just beeps but it does not open or close ...
Question about Cars & Trucks
...idea on what principle it works so I cannot even think about fixing it Disengage motor from gate by using key to unlock latch and pull release latch back to disengage motor gear . Then side gate ...
1,898 questions posted
Usually answered in minutes!
1,289 Questions
1,079 Questions
746 Questions
666 Questions
565 Questions