1991 Jeep Wrangler "holds serpentine belt" Questions

Ad

serpentine belt on a 1991 jeep wrangler with a 2.5 engine without power steering There should be a sticker in the engine compartment that shows the routing and you should be able to hold the tensioner

Ad

serpentine belt on 97 jeep wrangler? I just replaced water pump on my 97 wrangler, 4 cyl- without AC. Engines with AC are a little different. Since I don't have one, I can't saw how to change the belt

Ad

Question about Jeep Wrangler

3 Answers

...serpentine belt. Check the coolant level in the recovery bottle or surge tank, usually mounted on the inner fender. With the engine cold, the coolant level should be at the FULL COLD or between the ...

...holds the tensioner for my serpentine belt broke off and the tensioner and serpentine belt fell off. it is the second time this has happened is 3 days, new belt was installed 2006 chev uplander 3.5 ...

Question about Jeep Wrangler

1 Answer

...Serpentine Belt Tool and a socket set. Rotate the Caravan's serpentine belt tensioner assembly clockwise to relieve the tension on the belt. Slip the belt off the tensioner with your free hand ...

...serpentine belt, if it is a serpentine belt you are going to need a tool call serpentine belt tool kit, long bar with a socket on the bar, set of different sizes of sockets to fit the spring load ...

Question about Jeep Wrangler

1 Answer

...serpentine belt tensioner off the serpentine belt with the serpentine belt tool. Pull the belt of the remaining pulleys by hand. Take the belt out of the engine well. Wrap the new belt around the ...

...serpentine belt or seperate belt. If seperate, there are two bults on the alternator. Loosten both but do not remove. Take a prybar and pry back on alternator. Have someone hold the prybar while you ...

Question about Jeep Wrangler

1 Answer

serpentine belt, once this is done, then take the appropiate size socket and ratchet and remove the bolt that holds the idler pulley to the engine, once the pulley is removed, then install the new one

...serpentine belt on a 2005 kia sorento First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a ...

Not finding what you are looking for?
1991 Jeep Wrangler Logo

481 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...