Question about Jeep Wrangler
...a hundred and then it all depends on damage done , to hard to be accurate with out the head being removed, crack tested valve seats coupled , surface grind. bit of specialist machineing involved . ...
service due light on can i remove my service due light on my skoda fabia vrs without taking it to the main dealers .any help please. no it is against the law to do this!
...remove the old one and replace with a new one? I've looked everywhere and can't get the info I need. Even bought a twenty five dollar book hoping this info would be in it. No luck. Thanks. On the ...
...remove valve cover. Lifters are under camshaft if you don't know where to find the lifters you would be better off hiring a professional mechanic.before removing anything you should pin point problem ...
...REMOVE THE INJECTORS ON A 1999 V.W EURO VAN 2.8 VRS take of the front, including radiator, take off intake plenum; the injectors are sandwiched in the intake, take the two 6 mm allan bolts out, take ...
Question about Jeep Wrangler
...remove both heads and send them away for crack testing and surface grinding plus make sure the block has a flat and clean serface ,no water holes eaten away and near to the cylinder bores, if all ok ...
...take it away for Crack testing and surface grind (max 4 thou) no more. If all ok when done replace with new VRS and refill with coolant (but turn on the heater to hot before filling to remove all ...
...breaks inside the intake manifold. Either the coolant bypass / tensioner assembly will need to be removed or the intake manifold will have to be removed to replace the pipe. Hello, The O rings are ...
...Talon DL. The overhead camshaft sprocket cannot be manually rotated, the timing belt 'A' has been removed, timing belt 'B' is undamaged. The temperture for three days was below freezing, an average ...
481 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions