1991 Jeep Wrangler "replace brake pedal rubber stopper" Questions

Ad

Question about Jeep Wrangler

2 Answers

...brake lights have gone out,if so replace falty switch. good luck hope this was some help,PH. Sometimes the small rubber stopper that pushes the switch will wear out and fall out causing the switch to ...

Ad

...brake lights wont shut off when i turn off the car. i have a pack of rubber stopper to replace the missing stopper which i found crumbled up on the floor but i dont know where the hole is to put the ...

Ad

...brake pedal is pressed, the plunger comes outward, completes the circuit and the lights turn on. There are several faults that can make your brake lights stay on. The circuit may go bad and remain ...

...is under brake pedal it activates when you push pedal look under dash where brake pedal is with flashlight push brake with your hand you will see it easy to replace and relatively cheap part good ...

brake lights are turning off and on. 5 Replace the stoplight switch if the lights continue to stay on. Stoplight Switch Replacement 1 Loosen and remove the bolts holding the stoplight switch in place.

...brake light switch, if not, replace the plug. Most times when the light stays on the brake pedal does not come back and open the switch . the return spring on the pedal may be broken .or the bracket ...

...brake pedal arm. Many manufacturers use a rubber stopper in a hole on the pedal to depress a plunger on the brake switch when you let off the brakes. That rubber plug can dry and fall out over time, ...

...kill the battery. Readjust or replace the brake light switch. Check this: Sometimes the small rubber stopper that pushes the switch will wear out and fall out causing the switch to indicate

Question about Jeep Wrangler

2 Answers

...replace the brake light switch with a new one. If your brake light stays on after you turn your car off and you don't want to run your battery down, you may be able to get down underneath the ...

...on my car for there is 2 switches and there is 2 rubber stops attached to the brake pedal. this being gone will cause the brake lights to stay on all the time. Replace the brake light

Not finding what you are looking for?
1991 Jeep Wrangler Logo

481 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...