1996 Volvo 850 "replace ignition" Questions

ignition switch . What does anyone suggest? I need help. Thanks ,BC THE IGNITION SWITCH NEEDS TO BE REPLACED. THANKS FOR USING FIX-YA

...REPLACE THE CAT AND THE CODE STILL THERE P1310 is a misfire code which means misfire on more that one cylinder. Cat was probably damages as a result of the misfire. Start with replacement of the ...

...warmed up. I strongly suggest that you replace the ignition coil to resolve the problem. Not a big deal, it's common on all vehicle. Hope this helps and thank you for using FixYa! Have a good

...ignition OFF Remove the connector from the socket, replace the lids and put the connector back in its rest. Turn on ignition and start engine, the service lamp should not be on. Any error-codes? ...

...ignition while checking voltage at the coil to see if the voltage is intermittent. If yes, you have a bad switch. If no, I would next replace the coil. If you don't have a meter, you can use a simple ...

...continuity to the Ign ECU. Also When The Battery Is almost Zilch the car tries to start. check or replace the cam sensor, this sensor sense the turning of the cranksaft by sending info to ECU ...

ignition I hear the engine trying to catch but it doesn't on the first try. Usually after trying a couple of times it will catch. As the days go by, it takes me more tries to finally get the engine to

NO KEYLESS ENTRY. PARKED CAR GOT OUT AND LOCKED DOOR MANUALLY AS USUAL. HEAR AN ALARM IN MY COMPLEX. LOOK OUT WINDOW IT IS MINE WITH NO OTHER ACTIVITY. BEFORE I CAN GET BACK TO THE CAR ALRM STOPS. I ...

replace it? Hi!! The Crankshaft Position (CKP) sensor, sometimes called an RPM and/or impulse sensor, is used to determine engine speed and Top Dead Center (TDC). This ensures precise ignition timing.