1991 Honda Civic "crankshaft mark timing pulley" Questions

crankshaft timing pointer must be perfectly aligned with the white mark on the flywheel or flex-plate; the camshaft pulley must be aligned so that the word UP is at the top of the pulley and the marks

mark on the crankshaft pulley is tdc, there are 3 lines with a red mark and two lines with a white mark. the red mark is where the timing is supposed to be after u have bypassed the electronic advance

...mark on the crankshaft pulley should align with the pointers on the timing cover. Once the engine is in this position, it must not be disturbed. Raise and support the vehicle safely. Remove the front ...

paint)is top dead,and will be lined up with pointer on lower belt cover.with crankshaft damper removed ,lower timing gear has a dot stamped on ft face whitch lines up with arrow on block casting(12:00

...crankshaft pulley, and timing gear cover. Mark the direction of timing belt rotation. Loosen, but do not remove, the tensioner adjusting bolt and pivot bolt. Slide the timing belt off of the camshaft ...

mark on the pulley TDC? (1994 Honda Civic DX 1.5liter single overhead cam) You should remove the Crankshaft Pulley, because you have to remove the Timing Belt Cover to remove the belt, adjust tension,

Crankshaft pulley until the "up" mark on your camshaft is on the top, or TDC (top dead center). 7. Use a marker and write '1' next to the "UP" mark to help you remember which cylinder valve is okay to

...mark you are looking for will be on the crankshaft sprocket that the timing belt rides on. You line up that mark with the arrow on the block. This arrow is located directly above the crank

crankshaft timing pointer must be perfectly aligned with the white mark on the flywheel or flex-plate; the camshaft pulley must be aligned so that the word UP is at the top of the pulley and the marks

where to find timing marks on honda civic 1300cc motor timing marks timing marks on the crankshaft pulley and timing cover.