Question about Toyota Cars & Trucks
...system. The first is on the manifold, where the exhaust pipe joins and the other is after the first expansion box or Catalytic Convertor. There are pressure sensors as well at the Cat so check
...EXPANSION TANK OVER FLOWS WHEN I TURN THE ENGINE OFF, HEATER BLOWS COOL AIR. REPLACED THERMOSTAT, WATER PUMP, TIMING BELT, IDLER PULLY AND COOLING FAN ,THERMO SWITCH. AND THERMOSTAT HOUSING MANIFOLD? ...
...expansion plugs is that they are made of very thin metal, AND THEY RUST!!! From the factory they are made of galvanized steel, and if you always run a 50/50 mix of antifreeze in your cooling system ...
...expansion plugs) will "pop out" and supposedly prevent this. In reality this doesn't work all the time: I've seen MANY blocks destroyed by cracking without the freeze plugs popping out, or if they do ...
...expansion rivets. Then remove the splash guard from beneath the engine. Hardest part is draining the water without getting it all over the garage floor. You need only drain the radiator, but you will ...
exhaust. Next step is the water gets onto the coils engine light comes on and it mis fires!! Anyway solution. As it is doing it when you look at the bottom of the expansion tank you will see the water
1,848 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions