1996 Honda Accord "factory time fit timing belt" Questions

...factory service manual from www.helm.com . About $100. Well worth the money. The labor for just that one job will be probably 2 or 3 times that. Be careful, because some Honda'a are interference fit ...

timing belt, tensioner pulley, water pump. and idler pulley was all changed. They could have been incorrectly fitted not to factory spec so they disintegrated this may be due to you went with cheapest

...factory belt, they aftermarket belts many times fit poorly and make noise again very quickly. Agree with first post (I just bought 99) with some minor squealing; replaced (more from a preventative ...

...a screwdriver through and it will fit into a hole or spot on the block to hold it while you loosen the bolt. Use a impact wrench. These are very tight from the factory and this is not a at home

...factory specifies that the timing marks should always be aligned before removing the timing belt. Set the engine at TDC on No. 1 compression stroke. This should align all timing marks on the ...

...time. After you remove the top section of the timing belt cover, you should see a timing mark on the camshaft sprocket -- this mark usually lines up with the edge of the cylinder head or valve cover. ...

time finding clear information. Manuals say to line up sprocket w/ drive (index) pin - my sprocket has a hole or a slot that will fit drive pin (it was on the hole when disassembled). The manuals also

...factory installed A/C" and another that is "dealer installed A/C". If your parts supplier has both in stock and you are not sure, get both and return the wrong one later to save you time. 9. Put the ...

fit the new belt.Double check that your timing marks are correct and then place the new belt over the toothed pulleys with the tight side on the right, and any slack or free play on the left. Once the

...factory?? I don't know, all I know is two burned off four different kinds either didn't fit or mechanic didn't know what he was doing but the person that gave me the car said the belt kept breaking ...