Question about Honda Accord
...change the 3rd brake light bulb in the rear window? unscrew the case from around the light pull the case off and then youll have access to the bulb take the bulb out usually turns counter clockwise ...
Question about Honda Accord
my rear running lights dont work even after i changed the bulbs and the fuses after changing fuses and bulbs my rear running lights wont work Are the side markers and license bulbs working?
2. One on each side in the smaller of the 2 rear tail light lenses. In order to change the module you have to remove the smaller of the rear tail lights. Drivers side is 5 pin. Passenger side is 6 pin
change the light bulb. How do I do it? See https://techinfo.honda.com/rjanisis/pubs/om/CR0202/CR0202O00285A.pdf Pry the lens (the white part) from the rear near the two sides with a flat screw driver.
...bulb so just because the lights work doesn't mean that brake lights will. if the 3rd brake light works replace the brake light bulbs if none of them work including your 3 brake light. check into ...
...will work but my tail lights and my break light wont. what do i do to find the problem? they both use the same bulb on this car ,try changing the bulbs and running another earth wire as a ...
2000 honda brake lightts brake light in rear window work. brake lights in rear not working changed bulbs not working check the fuses than the relay's its one of these
...light in rear window work. brake lights in rear not working changed bulbs not working. brake switch replaced. 12 v supply is fine. fuses fine. what else could wrong? Give some more details of the ...
...rear brake lights dont work, changed light bulbs check all fuses in fuse box at end of dash on drivers side,. pull out each one and see if it is blown. it should be a 7.5 amp fuse. good-day
1,869 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions