2002 Honda Accord "break light fuse location" Questions

...break lights went out,not sure why,checked all the fuses and they all seem to be fine,unless we are missing soe more fuses? The brake light switch on your brake pedal may be bad. The owner's manual ...

...break switch. It is usually chrome looking and looks like a small cylinder. If you need anything else, let me know. I am here to help. Thank you very much for choosing FixYa. Does horn work? If not, ...

break light still doesn't work. Can you send me a wiring diagram of the break lights? The fuses all look good and I checked them with the voltage meter. there are two wires one red and one orange, one

light fuse. If this is good check the brake switch located just above the brake pedal. When the brake is pressed the switch comes out and causes the brake lights to come on. If this is the problem the

...break light do not work. Thank you. When the brake lights fail all at once, it's usually the brake light switch that needs to be replaced. It's located on the upper brake pedal. U unplug a wire, ...

...would that matter? thanks for any ideas. God Bless!!! Check fuses Check the computer in the tail light assembly. There is alittle computer which controls the break lights. One computer for each

...break in the wire somewhere and will need to track it down. Sometimes, there is a separate fuse for the 3rd brake light - have you checked for that fuse? It's possible the wire leading to the 3rd ...

...ex I have checked the fuses and the bulbs Check the brake switch that is located just above the break pedal. In the rear corners under the rear interior panels there are connector plugs that are ...

...light or with car off pull each fuse and check to see if there blown if u see a burn or break inside the fuse it is bad replace it. but i'm sure it's the vss. as for overheating check coolant level ...

...break lights, back up lights, turn signals are working. the only thing that is not working are my tail lights for the night time. i hear that its just a fuse problem i need to see the diagram because ...