...caliper mount (2 bolts on front wheels one bolt on rear wheels), secure the caliper out of the way with a wire, then remove the caliper mount. Then pull the rotor from the hub, if this is difficult ...
...front rotors on a 2007 subaru legacy Remove wheel, Brake caliper then the Brake caliper support bracket. Then Rotor slides right off of Wheel studs. Remember to support vehicle properly, and to make ...
...front the wheel bearing? Remove the caliper and rotor, undo the axle, ball joint and the two strut bolts, and take the entire knuckle off. The hub is pressed off, then a circlip removed to press the ...
Question about Subaru Legacy
... 2009 05 F250 brake torque specs please 6 posts Aug 22, 2007 Brake caliper torque specs 5 posts Jul 14, 2007 Front brake Caliper Bolt Torque 6 posts Apr 25, 2005 More results from ...
Question about GMC Cars & Trucks
...the Caliper bolts? Those are Brake Caliper Bracket Bolts - Front 175 N?·m 129 lb ft Brake Caliper Guide Pin Bolts - Front Tighten the guide pin bolt closest to the bleed valve first. 64 N?·m 47 lb ...
...front brake caliper-to- steering knuckle guide pin bolts from rear of front brake caliper. Remove front brake caliper from steering knuckle by first rotating top of front brake caliper away fro m ...
Question about Subaru Legacy
Caliper Mounting Bracket to Knuckle, Front (15 series) 175 Nm (129 ft. lbs.) Caliper Mounting Bracket to Knuckle, Front (25/35 series) 300 Nm (221 ft. lbs.) Brake Caliper Mounting Bolt Rear (15 series
...value on 2500 front brakes Front caliper mounting bolts 24 ft/lb. support plate 43 ft./lb. hd front caliper adapter bolts 210 ft./lb. ld front adapter bolts 130 ft./lb. caliper banjo bolts 30
...bracket bolt 79.6 ft lbs Caliper mounting bracket bolts: Front: 80 ft-lbs. Rear: 41 Caliper mounting guide pins/bolts: Front: Four-cylinder models 26 V6 models 37 Rear: All: 17 Hope this helps
...caliper Remove the front brake hose fitting bolt completely, then remove the caliper with the pads installed as an assembly. Take care not to drip fluid onto the pad surfaces. Cover the open end of ...
558 questions posted
Usually answered in minutes!
447 Questions
381 Questions
317 Questions
328 Questions
291 Questions
