windshield wiper motor for a 95 honda accord lx Well first you will need to take the main rod that moves the wiper blades , this you do by either removing a nut that is holding it on or the cotter pin
...remove the cowl and check for looseness where the arms mount to the motor by manually trying to move the wiper arms.I've seen the cam arm strip out and the bolts loosen up on the retainer that ...
...windshield wipers wont park in the proper position.brought it to a mechanic and he said it was the wiper control switch.replaced that, he was wrong.they start out in the wrong direction.first they go ...
...windshield,you need to remove the wipers and screws holding the panel in place,also unscrew the antenna ,underneath you will see another plastic panel holding the wiper motor,this needs to be removed ...
Question about Honda Accord
...remove the arm? First lift wiper blade up off the windshield like you would when changing the blades.It should stay up by itself, then look under the end that mounts over the shaft, it's a shaft end ...
Question about Honda Accord
...wiper motor right below the windshield), loosening and lifting the scissor arms for the wiper arms and removing the motor (this involves disconnecting the power connector and feeding it back to the ...
...windshield wiper arms off, and then removed the plastic cowling/cover from underneath giving you access to the wiper drive system. On the passanger side of the car right under the windshield is a ...
...windshield wiper seize up. Did not blow the fuse but ground the gear up. Anyway while working on removing the motor the battery ran down. Charged the battery but now the SRS light will not go off. I ...
...windshield wiper First are you sure that the motor is bad? Did you check the fuse, 4.8 amp circuit breaker(this goes out alot causing the wipers not to work.It is in position 15 on you fuse box), ...
2,210 questions posted
Usually answered in minutes!
2,940 Questions
2,649 Questions
1,608 Questions
1,531 Questions
1,434 Questions
