Question about Jeep Wrangler
...o2 sensor heater curcuit fuse in a 05 wrangler 4.0 l When that code shows up, it normally means that the O2 sensor is bad, or there is a bad connection or burnt wire. All of which are corrected with ...
O2 sensors and coolant temp sensor (for second time). Also problem seemed to be related to putting too much oil on spector air filter and using carb cleaner which appeared to foul O2 sensors (a second
...o2 sensor, added dry gas & fuelk treatment, reset light which came back on in two days ? slight rough idle when stopping. Did you replace the O2 sensor after the catalytic converter? This code is set ...
o2 sensor, spark plugs, gas cap, added fuel cleaner & dry gas.reset light & back on after days driving? REPLACE REAR O2 SENSOR AND A MUST TO HAVE YOUR EC/PCM UPDATED. IF YOU BOUGHT YOUR O2 SENSOR FROM
my ford fusion has three O2 which one is heated O2 sensore On a ford all the sensors have a wire that heats them you have upstream sensors up by the engine and downstream sensors located on or before ...
...o2 sensor have replaced twice with no improvement has bad odor from exhaust .also replaced catalytic converter.any idea where to look next? Check for intake leaks, intake hose leaks, check mass air ...
...regulator, see if it leaks at vaccum line, also if that model has a mass air flow sensor check that, and one more thing , i hope the o2 sensors werent universial, but oem type start there good
...O2 sensor(s). If the sputtering stops replace the O2 sensor(s). Mine was faulty and stuttering too and no check engine light or code was thrown. After unplugging the O2 sensor and monitoring for a ...
...O2 sensor a lean reading...seeing that, the computer will try to compensate by adding fuel. Clearing codes can change the way it's running but as soon as the computer runs through it's internal ...
342 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions
