Question about Hyundai Santa Fe
4-cylinder, it's located at the front of the engine at the crankshaft,.. on the 2.7 V6, it's located on the block near the transmission on the left hand side (radiator side), .. .and on the 3.5 V6, at
...4. If not, repair open or short in the wiring to the crank sensor and re-check. If the reading is okay, the problem is intermittent or the PCM may be at fault. Try reconnecting and checking for RPM ...
...4 engine. It is behind the timing belt cover mounted above the crankshaft sprocket. Sometimes they just fail because the sensor was a bad part, other times teeth shear off of the timing belt and get ...
The old fuel pump was as clean as a whistle with no screen blockage. the tank was like new with no floating dirt or setiment. I've aged ten years in 4 days and I need help. crankshaft position sensor
...crankshaft sensor light went out for 2 days back on now . Having problem with rpm drop while driving and has died while stopped. Also when starting it dies right away but will restart and die again ...
Question about Hyundai Santa Fe
...4 valves in engine and car is running perfect only for the code p2113 keeps coming up i have replaced the foot throttle but t replaced foot throttle Here is what the code is. I believe it is also ...
...crankshaft position sensor on the 4 cylinder and the 3.5L V6 are in the same place - Front Crank Shaft behind the pully (behind the timing belt cover. On the 2.7L V6, the Cranshaft Position Sensor is ...
...crankshaft position sensor. (the insulation was missing at the sensor on all three wires. I had to pry out the sensor as it was in very tight. When i was reaching in with a clean rag to clean out the ...
...4 cylinders, manual transmission, dual overhead cam and it got it's oil changed, new battery and now a new timing belt. My car still will not start after having died while I was driving it. I ...
1,298 questions posted
Usually answered in minutes!
1,503 Questions
1,043 Questions
1,001 Questions
417 Questions
235 Questions