2002 Land Rover Freelander "fit 1" Questions

Ad

Question about Land Rover Freelander

1 Answer

...BLOCK .FIT NEW BOLTS TIGHTEN IN SEQUENCE TO 7 FT LBS. SEQUENCE BOLT 1 AT 11OCLOCK BOLT 2 AT 5 OCLOCK. BOLT 3 AT 1 -OCLOCK BOLT 4 AT 7 OCLOCK BOLT 5 AT 3 OCLOCK BOLT 6 AT 10- OCLOCK BOLT 7 AT 8

Ad

Question about Land Rover Freelander

1 Answer

Timing belt position all details I want to know how does Land rover freelander fase 1 diesel timing belt fit. Fits on pulleys.

Ad

Question about Land Rover Freelander

1 Answer

belt just fitted timing belt..... won't start did you ensure the timeing belt and arrow was top dead center along with the no. 1 cylinder top dead center.

...following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should ...

Question about Land Rover Freelander

1 Answer

...1. Position trim panel close to the door and connect door speaker(s) multi-plug(s). 2. Secure door panel to door with clips. 3. insert escutcheon to door handle and secure with screw. 4. Secure hand ...

Question about Land Rover Freelander

7 Answers

...BEHIND THE INTERNAL TRIM. CORROSION PROBLEM ON THE TERMINALS HERE. NOT PATRONISING BUT HAVE YOU FITTED THE CORRECT LAMPS (LIKE FOR LIKE) Try www.landrovernet.com and ask the question there or try ...

...1 clip at the bottom pipe, you need to loosen the pipe mount to remove the hose). Once removed the return pipe you can undo the coolant rail: 2 (tight) bolts below the rail and the oil dipstick bolt ...

Question about Land Rover Freelander

1 Answer

...1/4'' adapter,the adapter seems to fit on the wheel cylinder but not on the fittings on the new lines and the new lines don't want to fit on the truck. Did they sell me the wrong size or wrong thread ...

Question about Land Rover Freelander

2 Answers

...will have to use a Gm J41712 Socket available in all part store which look like this. Description Fits 1-1/16" switches up to 2-5/8" long, found on newer GM and Chrysler vehicles Fits 1-1/16" oil ...

...1/2 inch drive hole) That will be the tensioner. get spanner or ratchet to fit & lever the tensioner away from the belt. Remove belt. fit new belt to most pullys except the easiest to get to, ...

Not finding what you are looking for?
2002 Land Rover Freelander Logo

1,319 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...