2002 Land Rover Freelander "removing front door light" Questions

front seat for electrical cables. sometimes the connections can get disturbed by feet or items that have rolled under the seats (specially if you have kids)making a bad connection of the cables As for

front bumper with no difficulty and this was soley for the purpose of replacing the filter drier. I checked the refrigerant level before I did this and also made sure I pulled a vaccum on the hoses so

front. There are two snap features at each end that hold it in to the center console. Unplug the two wiring harness connectors by releasing their respective latches. Separate the window switch housing

...front door....you just don't have the master switch...and a tool that looks like a flat tip screwdriver with a slot in it will help to remove the door panel without you breaking off the tabs that ...

...front door trim panel (23942) and watershield. Refer to Section 01-05 . Remove screw retaining lamp switch (13713) to front door latch (21812). Disconnect lamp switch from body main wiring (14A005). ...

...front of the door panel. The plastic holder should pull out of the door. Now pry up on both sides of the triangular panel and pull it loose. Remove the philips head screw you find under this panel. ...

...front door switch, 2001 A6 2.7T ? The interior light sometimes doesn't come on when the front driver's door is open. The light works for all other doors. I've looked all over and can't find the door ...

...front door trim panel (23942). Refer to Section 01-05. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger. Remove two screws from cover assembly. ...

...Front Door Removal Remove the screw cover. Remove the screws. Remove the front door trim panel (23942) from the door. Disconnect the electrical connectors and remove the front door trim panel. ...

front of the door (top and bottom) and in plain sight. But the center roller cannot be inspected until the center rail cover (an exterior narrow long panel) is removed. To remove the center rail cover