...viscous/fluid that expands as it gets hot. In doing do it forces the fan blades to keep up eith the shaft it is attached to. Of course it then pulls more air through the radiator for cooling. At ...
...fan and viscous drive as an assembly. Remove the fan blade-to-viscous drive bolts and separate the assembly. To install: Position the fan on the viscous drive. Install the bolts and tighten them to ...
...fan but cant get the centre piece off to gain access to the waterpump bolts?? any help would be great! thanks To get the viscous clutch of the water pump you first need to remove the belt pulley and ...
Question about Cars & Trucks
fan drag in cold temps for 2001 7.3L. Can it be stopped? No it just the way the viscous fluid works in the fans clutch. Way back when fans roared like that all the time untill the invention of the fan
...viscous fan from my b.m.w 316i 1996 petrol engine i have tried putting a spanner on the crank shaft and then another on the back of the large nut of the viscous fan i need to get of for replacement ...
Question about Toyota Cars & Trucks
...viscous fan hub ( fan clutch) if electric fans . fuses, relays and water coolant temp sensor to be checked if the over heating occurs at stop lights , slow moving traffic, hard pulls in low gears , ...
...cooling fan clutch to get it to work or something else? Hi Yes you need to replace what is called the Fan Viscous Coupling Unit. Then swap over the fan blades. Quite straightforward. Good luck !
...remove the fan (which I already did) and the fan clutch... I see no bolts or screws on it so I dont know how to remove it. the fan clutch ( viscous fan hub is a left hand thread on the water pump ...
...fan or Viscous Fan. If the electric, check if fuses are ok, connections fine, and if the motor works. If it is the Viscous Fan, there is not much you can do unless you want it to work permanently. ...
Question about Land Rover Discovery
...viscous fan clutch for controlling the engine temp from overheating. The auxillary fans in front are used when the a/c is on. I would start by spinning the engine fan or viscous fan by hand when the ...
317 questions posted
Usually answered in minutes!
318 Questions
325 Questions
215 Questions
235 Questions
219 Questions