2001 Hyundai Elantra "install throttle position sensor 3" Questions

Ad

Question about Hyundai Elantra

1 Answer

...throttle) does the MAP sensor indicate a reading that isn't at either extreme? Using the Freeze Frame data (if available) compare the MAP reading to the TPS when the problem occurred. This can help ...

Ad

Question about Hyundai Elantra

2 Answers

...install the throttle sensor, aligning the matchmarks. Install and hand-tighten the retainer screw. Connect the throttle sensor electrical harness. Connect the negative battery cable. Hope this help ...

Ad

...Install the TP sensor (2) on to the throttle body (1). Tighten Tighten the TP sensor screws to 2.3 N·m (20 lb in). Connect the IAC electrical connector (1) to the IAC sensor (4). Connect the MAP ...

Install: The throttle shaft end of throttle body slides into a socket in TPS. The TPS must be installed so that it can be rotated a few degrees. If sensor will not rotate, install sensor with throttle

...Throttle House off, clean it completely with Carbuerator Cleaner. 8. Install the new TPS. and installation is reverse of above. Good Luck, let me know if it helped and is there is anything else I can ...

...Install the TP sensor (2) on to the throttle body (1). Tighten the TP sensor screws to 2.3 Nm (20 inch lbs.). Connect the IAC electrical connector (1) to the IAC ...

Question about Hyundai Elantra

1 Answer

...throttle is good, then test the accelerator position sensor per the procedure below. Please let me know if you have any questions, and thanks for using FixYa. OperationThe APP sensor is an input to ...

...Install the throttle body.Install the air cleaner outlet resonator.Connect the negative battery cable. Could be the TPS - throttle position sensor .Rather then just guessing and replacing parts, ...

...Install the TP sensor (2) on to the throttle body (1). Tighten the TP sensor screws to 2.3 Nm (20 inch lbs.). Connect the IAC electrical connector (1) to the IAC sensor (4). Connect the MAP sensor ...

...throttle valve opening based on the TPS output voltage. Removal & Installation Disconnect the negative battery cable. Disconnect the sensor connector. Remove the sensor retaining screws. Remove ...

Not finding what you are looking for?
2001 Hyundai Elantra Logo

1,684 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...