2003 Mitsubishi Montero Sport "brake lights brakes activated" Questions

...by the brake pedal. When the pedal is up it pushes the switch in, no power to brake light. W HEN YOU PRESS PEDAL, SWITHCH BUTTON COMES OUT SENDING POWER TO BRAKE LIGHTS. CHECK THIS SWITCH

...brake lights).The Brake Pressure switch - is mounted to the brake servo/cylinder in the engine bay and acts as a secondary switch to de-activate the cruise function.Have an assistant check the ...

...Brake lights work, and dash lights flash with right turn signal. What is going on? Your tail lights and brake lights are on a separate electrical circuit mainly because your brake lights need to be ...

brake lights? Most vehicles with a thrid/highmount brake light split the brake light power to either the left and third brake light and the right brake light or vice versa, or posibble 3rd brake light

...brake lights. It sounds like the switch above your brake pedal may be bad. When you push on the brakes, the switch pops out activating the brake lights, and when the pedal comes up, it presses the ...

brake lights were on continuously.changed brake switch now the wont work at all and stuck in park The brake switch is probably mis-adjusted. If it does not activate when the brake pedal is depressed, ...

brake lights wont light up.i have turn signals and flashers but no brake lights. Sounds like a brake lamp switch or fuse. Check all fuses electrically, with a test probe you can purchase from any auto

...brake lights year/make/model?? The brake lights are controlled/activated by the brake switch attached to the brake pedal. This switch if defective will affect the operation of the brake lights. On ...

...brake lights tail lights work but nothing when i hit the brakes fuses are good PLEASE HELP There is a switch that the brake pedal activates when depressed, and it activates the brake switch. It is ...

brake lights stay on permanently on 97 ford escort. the cause is the brake light switch on the backside on top of the brake pedal. it is either out off adjustment or it needs replaced. this switch ...