1998 Toyota Camry "transmission bolt torque" Questions

...back in the torque converter? Torque converter bolts come loose? Was the torque converter moved any or not put in all the way? I would also check to see if the transmission has any fluid

...transmission pan gasket Drain the fluid through the allen drain bolt, if equipped. Retorque drain plug to 36 foot pounds Remove the 10mm bolts around the perimeter of the transmission pan. It often ...

Transmission model A541E (17 bolt fluid pan): - Service change only - 3.7 quarts. - Total refill - 8.5 quarts.Hope this helps; also keep in mind that your feedback is important and I`ll

...bolt version" transmission, as you'll need to loosen 15 bolts before you get to see the filter. --- FLUID CHOICE --- For cheapest way, you can buy the SuperTech Dex III from Wal-Mart for $10/gal. Or ...

...Transmission is all disconnected and hanging freely.Just can't fit it out.Maybe engine removal? Have ya removed the bolts holding torque converter normally have to remove one by onehole in ...

...bolt located on a 91 Camry? And...what size wrench? if your asking about the transmission band it is internal need to drop the transmission pan to get to the following link explains how to do it ...

torque converter leak will show up as fluid leaking from the bell housing. Talk to your dealer or a trusted auto parts store and ask for a product that is compatible with your transmission. Gunk makes

...torque converter bolts leave the engine bolted to the transmission. Look in manual to see were to connect the chains and lift the engine out of the car on an angle engine up trans down. this is a ...

...returns then you need to replace the catalytic converter. also is it an automatic or standard transmission? If automatic the torque converter is stalling at to low of rpm and needs to be

what is the recommended torque setting for a 1997 camry transmission pan bolt? toyota recommends 43 in-lbs but you should torque between 80-120 in-lbs to prevent leakage