2001 Toyota Highlander "proper clutch replace" Questions

...proper lb level? yes i know you probably already checked this but need to ask anyways, have to start somewhere. next is there any little particles of metal shavings between the compressor and ac ...

...clutch components and are still experiencing leaks, I recommend checking all components for damage or proper installation. If necessary, consider taking the vehicle to a mechanic for further ...

...when the clutch was installed did you use a clutch alignment tool. is the trans and clutch torqued properly. is the shifter support bracket in place and torqued properly......here is a write up that ...

...clutch fluid proper way to replace clutch fluid The best way is to replace all the fluid including the fluid in the line to the slave. Here's how I do it. safely raise the front of the car enough to ...

the hydraulics fails to resolve the problem, the clutch master cylinder and the slave cylinder will have to be replaced. These two items have to be replaced at the same time for proper clutch function

...i go about checking this? Depending on the mileage on the vehicle, you may have to replace the whole clutch assembly. Check the hydraulic or cable to the clutch to insure that it is working

proper clutch pedal height should be 0.2 in. (5mm) above the brake pedal height If adjustment is necessary, loosen the locknut and turn the adjusting bolt until the appropriate height is reached. Once

...slipping or noise then the clutch plate likely has some life left if it is adjusted properly and promptly .. replace the clutch disc and throw out bearing. should replace pressure plate as ...

...adjustment, the switch should open and close when the clutch pedal is depress. If the switch is properly adjusted, replaced the clutch switch to resolve

...it simply be hose? what is proper procedure to replace clutch master cylinder? check fluid in resvior,bleed and check hose to tranny for leaks,clutch slave cylinder might be bad but try