1998 Toyota Tercel "degrees foot pounds" Questions

foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger 1st pass 22 ft-lb 2nd pass 36ft-lb 3rd pass/ 90

the oil pan put the new RTV sealant on and away you go. Screw it back on and wipe off squeeze out. Head bolt torque 39 foot pounds, Do proper squence and the final turn is another 90 degrees, 1/4 turn

what does 90 degrees more torque mean it should be foot pounds of torque or inch pounds of torque. there are two types of torque wrenches foot pounds and inch pounds. Good Luck

Exhuast manifold torque 38 foot pounds, Head bolts are 38 Foot pounds after you add sealant to the bolts then after torque go another 130 degrees. Tighten center 4 bolts in sequence another 30 degrees

foot-pounds of torque. and i,m sorry i cant seen to remember the order Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using

...to the manual (Chiltons). #1 YOU MUST USE NEW ROD BOLTS AND NUTS !!!! #2 TORQUE TO 17 FOOT POUNDS !!!! #3 TORQUE TO 32 FOOT POUNDS !!!! #4 TIGHTEN AN ADDITIONAL 90 TO 120 DEGREES !!!! #5

...I mean screw cap top block. Replace bolts and torque to 65 foot pounds and this is the 3rd torque work up to it then turn the bolt to 90 degrees the torque should show 90 foot pounds or ...

...bolt torque specs for a 94 volvo 960 6cyl twin cam engine and also the cam and crank timing marks you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you ...

foot pounds mean? IE: 25lbs. + 60 degrees + 60 degrees + 60 degrees + 10 degrees This is a method of specifying how many additional degrees of rotation to turn a bolt after reaching a specified torque

94 2.4 head torque in pounds i have a manuel but it says 90deg an i wanted to know if some one figured it out in pounds degrees has to be a misprint it should be 90 foot pounds instead