1993 Toyota 4Runner "replacing brake lines" Questions

Ad

Question about Toyota 4Runner

1 Answer

...brake lines is leaking the line runs the lenght of the truck on the passenger side next to the frame and above the fuel tank need the diagram to figure out how to get the line replaced Hi, I had this ...

Ad

Question about Toyota 4Runner

1 Answer

...now I can't seem to build up press. in order to bleed system. did you possibly replace brake lines with standard instead of metric lines.The standard lines will fit but you will not get pressure ...

Ad

Question about Toyota 4Runner

2 Answers

...brake lines is cracked,broken, inspect for leaks and replace with new line. 4. notice on disc brakes if a brake caliper fails (part that squeezes brake pads to rotor) you will have the same symptoms ...

Question about Toyota 4Runner

1 Answer

brakes drag and lock up have 87 toyota 4x4 truck replaced drums, roters, master, calipers, lines, and brakes still drag and lock-up. Check or replace the brake booster.

BRAKE LINES? LINES ARE LEAKING AT POINT THAT THEY ARE HELD TO THE REAR CROSS MEMBER ABOVE GAS TANK. hAVEN'T CHECKED IF THEY ARE AVAILABLE? DO YOU KNOW? V6 4-WHEEL DRIVE You can buy brake tube from any

Question about Toyota 4Runner

2 Answers

replacing it or could see possible failure. Any ideas? if you can see brake fluid around the booster then yes it is most definitely not right, but sometimes these can fail without any fluid noticable,

What causes low brake fluid pressure on rear brakes? Each side has a wheel cylinder with a hydraulic line connected to it,when you push brake pedal,they push the brake shoes against the drum to ...

Question about Toyota 4Runner

1 Answer

motor wants to stall when I step on the brake at a stop lite the motors rpm drops like wants to kill the motor I let off the brake an it is fine any help would be great thanks. There is a check valve ...

Question about Toyota 4Runner

1 Answer

front brake lines and still no different can someone plz help frozen (or seized) caliper pistons. must free them up by using caliper piston press or makeshift tool (try channel lock pliers and plywood

brake line developed a leak. can i just replace the small broken section or do i need to replace the whole line? you can replace only the short section if you like using compression connector and they

Not finding what you are looking for?
1993 Toyota 4Runner Logo

495 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...