1995 Toyota Corolla "big ends mains" Questions

...big ends). Tighten bolts in several steps. 1st stage 29 NM, 2nd stage, rotate further 90 degrees - Main cap bolts (crank shaft). Tighten bolts in several steps. 1st stage 44 NM. 2nd stage, further ...

...main bearing tighting in the following stages: 22Nm then 44 Nm then 45 degree then 45 degree big end bearing 20 Nm then 90 ...

what are the torque specs for a toyota corolla sedan big ends bearings and mains bearings Check shop manual. Don't trust some stranger for this crutial info!

Could you please help with engine torque settings mains,big ends,cylinder head for 1.3 toyota corolla 1nr engine. Thank you go buy yourself a repair manual

...Engine valves. - Valve guides, - Piston set (oversize). - Ring set (oversize). - Main and big end bearing shell set (Oversize). - Crankshaft thrust (oversize). - Timing belt and bearing

I need the torque settings for Isuzu KB200 with Opel MPFI engine Year 2000. Cylinder head, Mains, Big ends and flywheel pls specs are available from parts store or dealer service..

...suggest it could pittex or knobbearings with the engine light on I suspect that you have failed big end or main bearings from lack of oil pressure.. Drain oil into a clear container and if you ...

Torque Settings for Flywheel bolts and big ends and main bearings for a Toyota Corolla 1.3 2010model I do not show a 1.3L in this year are you sure.

mains and big end bearing torque values for a 4zz toyota corolla http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

3zz torque settings Mains,big ends and cylinder head torque specs Follow link. Torque Specs Database