2006 Toyota Tacoma "engine light inserted key ignition" Questions

engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure? http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html ----------

...engine off and wait about 10 min until light goes out then remove the key and repeat this step when light goes out repeat step one more time then use key to start car, computer has learned all info. ...

...light after battery change. Car wont start, Changed battery, everything works electrical but car will not start. Does this have something to do with the alarm system. Is there a bypass to start the ...

...inserted the wrong key (non PATS) The one for the doors. It turned the ignition but did not start the engine. After realizing my error I used the correct key but it will not start the car either. It ...

...engine and the theft indicator light will illuminate for three seconds and then go out. If the key was not successfully programmed, it will not start your vehicle?s engine and the theft indicator ...

...park OR neutral. C: NO A.C or FAN, blinkers, Power windows, radio, mirror motors, YET locks, lights and Engine work EXCELLENT! SOLUTION: Wiggle forward and back THE IGNITION key! BAD IGNITION

...engine and the theft indicator will flash rapidly on and off. REPEAT Steps 1 through Step 5. to reset security light: Place key in ignition, (do no start) leave in ON position for exactly 10 minutes. ...

...light blinks, engine turnover good but absolutely no way will it start. I was thinking the module is bad but system responds to remote, bells and whistles (as with panic button or foced entry) do not ...

...engine will switch off. when there is no key in the egnition, just by switching the headlight switch on the ignition light comes on as if a key was inserted in to it. sound like short in ignition ...

...work, turned off ignition switch, engine kept running. Re-inserted key and turned switch off again, engine stopped running. Engine seems to be running fine but check engine light is on. change the ...