2008 Toyota Highlander "change odo" Questions

...change. to reset the light the odo has to be on current mileage not trip a or b. with the car off push in the stem for the odo and hold it and then turn on the key the numbers will disappear and ...

...change the oilhow do you This is the reset proceedure for a 2008 Highlander with a key-type ignition: Turn the key ON, do not start the engine. Look at the odometer, and verify that it displays "TRIP ...

...change. THANK you in advance for any assistance in this matter. This is the reset proceedure for a 2008 Highlander with a key-type ignition: Turn the key ON, do not start the engine. Look at the ...

...change light it is proper for maintance and the life of the engine and be sure to reset it. just for laughs here is how to reset it. push odo till "A" odo appears turn key to off while you hold odo ...

...change light on the dash of a toyota corolla verso 2.o d4d 2004 Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total ...

...change light ?> Here's how you reset your oil maintenance light. To reset the light, Turn the ignition on Make sure the odometer displays "ODO" 1.Turn the key off 2.Press and hold down the same ...

...ODO replacement, their car runs smoothly again. The culprit is the chip in the instrument cluster, so you need to change the instrument cluster (or the chip in it if you think it can be replaced). ...

...change done, the shop should have reset the light for you. To reset the light, try doing this: Turn the ignition on Make sure the odometer displays "ODO" 1.Turn the key off 2.Press and hold down the ...

...change Here's how you reset your oil maintenance light. To reset the light, Turn the ignition on Make sure the odometer displays "ODO" 1.Turn the key off 2.Press and hold down the same button you use ...

...change Here's how you reset your oil maintenance light. To reset the light, Turn the ignition on Make sure the odometer displays "ODO" 1.Turn the key off 2.Press and hold down the same button you use ...