2008 Toyota Highlander "reset efi" Questions

...efi fuse remove them both along with the fuse marked e.t.c.s. leave them out for 1 minute or so and that will erase the code and reset the light. make sure the key is switched off before removing ...

...EFI fuse for 10 seconds. This will reset the system. The fuse location is marked on the lid of the fuse box, also I believe the EFI fuse is the only 20 amp fuse.(and after you're sure nothing is ...

...reset the check engine light, you remove the EFI fuse from the engine compartment for about a minute. If there is a problem, it will soon light up again. This is where the EFI fuse is located. As you ...

...reset? It never shut off belt light. Any ideas on why its having power issues? no year car told (OOPS NOT A CAR BUT IS OFFROAD ATV, MOVE YOU I DID) 2004 TO 2022? NOT TOLD. all cars now have those ...

EFI fuse (15 A) for 30 seconds. This will reset the ECU which is going into Limp mode due to relay malfunction. Let me know if it works, i am going to change the relays on my sister's car tomorrow and

...reset by removing the EFI fuse or negative battery terminal for 5 sec or more. It can also be reset by the help of scan tool or diagnostic computer. After the ECM is reset it become essential to ...

efi fuse pull them both along with the E.T.C.S. fuse (if there is one) for 1 minute or so. That should do it This light comes on when your vehicle is due for an oil change. Roughly ever 4500 miles. To

How to reset computer on a 92 celica gt? how do u reset the computer on a 92 celica gt, PULL EFI FUSE FOR APPROX. 30 SEC.

it seems as though the whole fuel system has shut down. Is there a reset switch somewhere? dont have reset switch, check EFI fuse and relay, if good check fuel pump

efi switches that dont reset The breaker can be reset safely by flipping the breaker switch to the OFF position momentarily, then flip back to the ON position.if you need a OBDII Code Scanner ...