2008 Toyota Highlander "resetting trip meter oil" Questions

Ad

Question about Toyota Highlander

5 Answers

...trip meter A reading shown. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON. Without multi-information display Continue to press and hold the button ...

Ad

...trip meter reset button, hold it IN. DO not release it. Turn the key ON, do not start the engine Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, ...

Ad

...is and where your trip meter reading is you will see like 5 or 6 little lines that will disappear one at a time and when they all are gone you can let go of the reset button and light should be

...trip meter reset button.  Hold down the knob for at least 5 seconds. The Odometer will flash 000000 and blink down to ------the light goes off. If the system fails to reset, the light will ...

...trip meter does not log miles. After an Instrument Cluster change, (used), the trip meter does not work on my 1994 Toyota Corolla DX. Odometer, Speedometer, Tachometer, oil, temp, etc. works fine. ...

...switch to ON position while holding down trip meter RESET button. 2. Hold trip meter RESET button down for at least 5 seconds until odometer indicates "000000" and MAINT reminder light goes

meter continuously as I also change the Engine oil in time U have 2 take it back 2 whomever changed the oil so the warning light can b reset! You still have to rest the computer after oil change. Turn

...trip meter A reading shown. While pressing the trip meter reset button, turn the "ENGINE START STOP" switch or engine switch ON.Without multi-information display Continue to press and hold the knob ...

Question about Toyota Highlander

1 Answer

trip meter reset knob and hold it , turn ignition on , with the engine off, continue to press and hold reset knob until the trip meter displays "00000" , reminder light will turn off . if system fails

Question about Toyota Highlander

1 Answer

trip meter "A" Turn the "POWER"switch off. (If you have push button start) While pressing the trip meter reset button turn the "POWER" switch to ON mode (press power button 2 times, foot off the brake

Not finding what you are looking for?
Cars & Trucks Logo

555 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...