Euro-Pro Shark GI490 Iron "thermal fuse" Questions

...thermal fuse inside iron that's why not getting hot. thermal fuse blown up due to overheat inside change the thermal fuse inside iron that's why not getting hot. thermal fuse blown up due ...

...red light indicator doesn't turn on, and at the same time it doesn't heat up. where is the thermal fuse for this iron? mine has the same problem, I don't know what to look for. replace thermal

Is there a thermal fuse in a RUSK STR8 flat iron (problem: no heat ,but LED lights ) THANKS ! yes there is a thermal fuse in series with the heating element inside the unit

...ON? MY BLACK&DECKER D2030 WHEN PLUGGED IN DOES NOT POWER ON. . IS IT THE THERMAL FUSE ? AND WHERE IS IT LOCATED IN THE IRON ? THE THERMAL FUSE. my black nd decker iron lights up but will not

...thermal fuse has opened. You'll need to open it up and check continuity of both. The thermal fuse is probably easily found and replaced, however the element probably means its more cost effective to ...

...thermal fuse on steamglide iron? The iron smelled hot (beyond the obvious) and bleeped continuously. All the lights work (as I adjust the settings) but the iron is not getting hot. If you are ...

...thermal fuse The Black & Decker steamxpress 680, according to an advisory post, may have a faulty thermal fuse (the iron is on and off in spurts, mostly off, with the on/off light eventually not ...

...thermal fuse is probably bad. This part costs about $2 but you need to know what you are doing to replace it. The thermal fuse is located in the middle of a wire attached to the top of the water

...thermal fuse that has blown. This is mounted on the base of the iron and requires a near total strip of the appliance. It is mounted in series with the element and looks like a metal resistor, inside ...

...and wall socket The leads, both the live and the neutral The temperature selector (Thermostat) The thermal fuses The element To do this testing you will have to strip the iron and get to the wire ...