Question about Mitsubishi WD Televison & Video
red light wd 62327 red 3 blinks 1 steady red light Light is less than 3 months old. all fans working everything seems to power on. this issue happens once a week. for about 2-4 hours. Call for waranty
Red "lamp" light stays on Red "lamp" light stays on and screen will not light up. Red light indicates the lamp has failed to light. You may just need to buy a new lamp. If that does not help
...Red light blinks If the red lights comes on and stays on, you will need to replace the lamp. However, if the red light blinks repeatedly, your internal motherboard was either fried during a recent ...
...light red. No picture, sound, nothing. T.V. starts up and then within 10-15 seconds the lamp indicator light turns red again. Any help would be greatly appreciated. you have mention that after 10-15 ...
Question about Mitsubishi WD Televison & Video
...red light next to the green light & then only sound before the tv shuts off Which light is red? If its the lamp light thats solid red then the lamp or power board has an issue especially if you ...
Question about Mitsubishi WD Televison & Video
...red lamp light remains on. Lamp will come on for a second then go out. About a minute later the red lamp light comes on and unit shuts off. Check the lamp door to make sure it is seated properly I ...
Red light Replaced lamp. Female connectors were never secured inside unit. Reoved back panel and secured female connectors. Installed new lamp. Strted TV, blinking green then the red light of ...
Question about Mitsubishi WD Televison & Video
...red lamp light was on and I replaced the lamp. the red lamp light came back on after replacing with a new lamp. Could there be another problem Yes the capacvitors on the power board can cause the red ...
...red light would start flashing. It would work for a bit if we unplugged it and let it sit for a few minutes. Now it shuts off right away and the red light flashes and we are not able to do anything. ...
Question about Mitsubishi WD Televison & Video
red light comes on When the red light is lit press both the menu and device buttons in on the front of the set in together and hold for 5 seconds then record the two digit blink code that will repeat.
33 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions