Sony Bravia KDL-40S4100 40 in. LCD TV "powers" Questions

...with the power strip or surge protector and not the television.) 4. Turn on the TV. 5. When the TV powers on and a picture is displayed, reset the TV to factory default settings. If the Reset

My tv will not turn on most plasma tv have two power botton, ha main power which is mostly located at the lower side of the tv, and the sub power/standby power botton located in the top of the tv.. ...

How do you turn off TV? Press the Power button on the remote control once, when the set it powered up. It will power OFF. If you want to power down totally, just switch off the main power at its panel

5v. at the power supply. Any suggestions? Sounds like you may have a bad inverter board. This board powers the back light on the lcd panel. This board may be replaceable or the complete panel may need

my 40 inch S400A Series Full HD BRAVIA LCD TV does not turn on. When i plug it in, the green light (next to the Red power light) blinks. If i try to power on via remote, the red power light turns on ...

My Sony Bravia LCD Model-KVL37S400A is not getting the Main Power supply. The LCD is not getting switched on. Nothing is happening when i click on the Power button. Hi You may have a power supply ...

lcd tv not powering on TV is not powering on, no red light or anything. Like its not getting any power. HI, Probable power supply board is faulty. Some times in power surge the mov (high voltage ...

Sony KDL 46HX820 turns on, then off and red light blinks four times. Need to know what's wrong Re: Bravia KDL46EX720. Red LED blinks 4 times and TV wont turn on. What is the problem? Do a Power Reset.

power is not coming on sony LCD TV. No standby power after switch on. hi, check the power chord first. also check whether there is power in that power socket to which ur tv is connected. if all these ...

Kdl-46ex700 won't power on - standby LED blinks 7 times Upon hitting power button a click is heard but tv won't power on. Disconnecting AC power and reconnecting allows tv to power on but problem ...