Sony Bravia KDL-40S4100 40 in. LCD TV "switch dvd player tv" Questions

DVD player because of having some failure of electronics component housed on this circuitory. 4> switch the mode among 'PAL' , 'NTSC' , 'AUTO' and OTHER in playback mode options ,one by one taking&

...dvd player through surround sound fine, but cannot get audio from tv to come out via surround sound. I assumed that HDMI would communicate both ways same as scart, and would like to avoid scart ...

...dvd player is hooked up correctly and have made several changes on the hook-up to the tv, but will no success. What do I have hooked up wrong or what else should I be doing? Try going into menu input ...

...DVD has HDMI, just buy a HDMI cable and you're done. If you cannot figure out how to switch the audio input, there is no big harm in just installing a separate RCA patch cable between the two for the ...

...dvd player. It does have sound. I connected to another Dish system at another house and the problem remains the same. Any ideas? If it works on DVD but not on your Dish, and when you connected it to ...

...switch that I am missing? How do I get better quality????? It very much depends on: the model of DVD player you have and whether it is a standard or blu-ray player the settings on the player the type ...

dvd player. How do I connect 2 hdmi cables fron the components to the tv? Don't used the Blu Ray player on the tv HDMI out put hub.Used the connections for of the Blu Ray player connections by a S

...loud static.Is it the tv or the receiver? If you have another source for the AV receiver like a DVD or blue ray player then switch to it and see if the static goes away. If it does then it's the

...DVD player and see. Switch off TV, switch off power, remove plug and wait for 48 hours and retry.If problem persists, I suggest it is better to refer it to a qualified service technician, since the ...

switch the screen to show the dvd...the dvd is running, just not on the screen check your connections first, dont use these connections with many pins, make sure use of those coaxial cable connections