Question about Canon PIXMA Office Equipment & Supplies
...upside down and used a box cutter to cut a trap door in the center of the bottom, pulled out the absorber, replaced it with an equivalent sized rectangle of printer's cotton, and taped the door ...
...Turn the printer upside-down. Shake it (not violently!) in a variety of slight angles end-to-end. Then WHILE IT IS TILL UPSIDE DOWN, open the lid/cover, and shake the same way again, to release any ...
...upside down, but no results I continued reading what others did with the same problem and one said to move the printer head to the left and look to the right way under there. Sure enough there WAS a ...
Question about Canon PIXMA Office Equipment & Supplies
...upside down and a 2" flower stem fell out from when I cut some flowers next to my desk. It still didn't work. I was examining the feed area while it was running and I found another little piece of ...
turn it upside down so ink does not drip out. Flush warm water with a drop of detergent through the metal meshes at the bottom front inside of the print head unit. Continue untill the water coming out
...upside down and put something to loosen the paper feeder. sometimes there is only a foreign object that cause this thing to happen. If that does not work then take a piece of cardboard like from the ...
...the feeder. lous clicking noise. I have tried shutting off and still nothing is working. All you need is just to turn the paper upside down. This printer requires the paper with the glossy face
...fallen in the printer. Try to turn the printer upside down to let the object to fall out. Help it with some flat scredriver to release the paper pressure shafts which springs may hold the object ...
Question about Canon PIXMA Office Equipment & Supplies
...Turn printer off and unplug the printer from all cables (power, USB, etc). Try to hold it upside down and gently shake it so that if there is any paper inside it?s removed. If still it?s not resolved ...
Question about Canon PIXMA Office Equipment & Supplies
...turn the printer upside down and gently shake it, see if anything comes out. If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently ...
405 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions