Mackie 1604 Vlz3 16 Channel Mixer "bad" Questions

Ad

Question about Marshall Music

1 Answer

...of the knobs or buttons changes the hum. Could this be a blown speaker or a shorted reverb unit or bad pre amp tube? Blown speaker NO (would not get sound at all) Bad Reverb UNLIKELY (controls would ...

Ad

Question about Line 6 Music

1 Answer

...$2 that has failed. Common problems include: broken connectors, broken pots, circuit board cracks, Bad solder connections. Bad solder and bad jacks are most common with bad pots third in line. Bad ...

Ad

Question about Digi-Tech Music

1 Answer

I have a bad hum in my digetech live 4 When I plug the vocalist in there is a bad hum you may have a bad cord. try others. all so try reversing the polarity on the back of the amp. DFD

Question about Marshall Amplification Music

1 Answer

Bad Humm Out Bad Humm out First disconnect all inputs. If hum is still there, PROBABLY the filter capacitors have gone bad. Replacement is the cure. IF there is no hum without any inpout cable ...

...it but it keep cutting out. The things to check arre FIRST the cable. These often have breaks or bad connectors. Replace with known good one and try it. Next are the jacks on the guitar and the

Question about Fender Music

1 Answer

...checked all my wiring and its good Don't replace the board. Have a competent person check for bad component and PRAY it is not one of the pickups. Common failures are JACKS, POTS, and

Question about Fender Music

1 Answer

...Hot Rod Deluxe problem. Only one 6L6 glows, swapped tubes, left-hand one still no glow. Brittle, bad sound. Just a player, not an amp guy! Thanks. This sounds like a bad solder joint or cracked ...

...Most common problems are damaged power jack(or cracked trace on the supply board near the jack ), bad AC adapter, bad power supply board(shorted semiconductor, regulator, etc ) and rarely a bad ...

Question about Fender Music

1 Answer

...amp is never moved around gigging. Always in the same place. Hot Rod DeVille "212" Are the tubes bad? Do they light up? Check the tubes and install replacements if necessary. If it's a preamp tube ...

Question about Mackie Music

1 Answer

...work, but the hum is in the background If it is a  60Hz or 120 hz hum, the fault may be a bad solder connection to a filter capacitor in the power supply.  If it is a hum like a bad

Not finding what you are looking for?
Mackie 1604 Vlz3 16 Channel Mixer Logo

141 questions posted

Ask a Question

Usually answered in minutes!

Top Mackie Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Are you a Mackie Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...