...fader control on a peavey escort 2000 Changing faders USUALLY involves removing all panel hardware so that circuit board can be removed to get at the fader. It is often a LOT of work with a boit of ...
...to Output A for the monitor speakers. Mon2 fader is NOT used. The individual channel faders control the main mix and the Main fader controls the level sent to Output B which goes to the main
knbs under each channel to proportion between the mics... adjust the FX fader for the USUAL control of effect amount... and finally the FX to main knb to set the limit of the effect going to the MAINS
...POST fader, AUX 3 is POST fader only... this means that the channel faders control the AUX3 level as well as the aux out level. Make sure you use TRS balanced lines to your speakers and not TS
fix p+g faders on mackie control deoxit in faders - p+g no longer makes replacement faders, so i need to fix the ones that are on there You might call mackie for a suggestion at 800-258-6883. ...
Can the faders on the behringer sl2442 be cleaned without dismantling and if so, how? I have one fader where the signal goes intermmitent when the slider is moved. I will give you something to try and
Question about Music
I can't get my Behringer XENYX X1222 USB to control any of the faders within Sonar X1 Producer. I can't get my Behringer X1222 USB to control any of the faders in Sonar X1 Producer. I have
Question about Music
...fader" we'll assume you mean the sliders on a mixing console, etc. These potentiometers are rectangular in shape and are usually held together by bendable "tabs" that hold the mechanical mechanism ...
control the volume with the faders. With those faders completely "off", the output is zero, just like the channels that work. If all other functions work for those channels, the most likely problem is
141 questions posted
Usually answered in minutes!
35 Questions
24 Questions
14 Questions
13 Questions