Behringer Pmp3000 16 Channel Audio Mixer "hook 2 amp" Questions

...2 Rumble amps together? Say linking a 150 to 350. Thanks Yes. There could be big issues depending on how you want to "hook" them together. If you are wanting to simply run them at the same time (play ...

...input cables into 2, so that you can use one ouytput to run 2 channels. just hook up the output cables to the output on the numark, and use the splitter adapter to split the sound between the 2

...hook up the mixer to the amp the amp showing it clipping and no sound to the main speakers If you are getting signal from you mixer at leaves tha are clipping your amp, then the mixer is working and ...

...2 channels of the amp. or, you could hook the crossover to the main laft and right outputs of the board. send the 2 low outs, left and right, to the subs' amp, and send the two high outs, left and ...

how to hook up to dbx i have 1 amp to a jbl 728 sub .bridged mono.and one qsc amp to pair of ev full range speakers how do i set up dbx TRY E-BAY.

hook up 2 separate power amps to PMP3000? I Can I hook up 2 separate power amps to PMP3000? I need 2 sperate ones. One for a Subwoofer, and One for my main speakers. Here's a description for Subwoofer

...hook up the amp to the mixer into either mono's 1 and 2 or the main 2 however not in main 1 with full power.what r we doing wrong?the speakers are not run in series except for the b2520 to the ...

...2 subs? The subs are not powered, but do have a passive crossover installed in them. Can I just use the Pyle Pro PTA1400 power amp to run the subs and eliminate the Ashly XR1000 crossover? If ...

hook it up and what cables I will need. Thanks! The compressor is a really good idea and should be connected between your mixer and your amplifiers. Your "integrated" mixer/amp is a bit tricky in that

...amp, headphones and 2 different sterios. Always the same feedback sounds present. Bought it last night used, wondering what kind of things go wrong A bad ground connection?. Try tightening the nut on ...