...light that comes on Either one of the amps or the power supply has blown. The protect light means the power supply has been shut down due to overcurrent. Take unit in for repair. These are hard to ...
...amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do ...
...light come on and all the sounds cuts aout then comes back on Go to http://peavey.com/support/searchmanuals/archived.cfm Their main site also has info. DDT is an active compression feature to protect ...
light comes on is that beacuse my amp is overheating or is it normal it does that when i crank the volume amp i not hot well vented Here is a link to the manual:http://www.peavey.com/assets/literature
...light This probably means there is a failure and the internal protection circuits have activated. It will probably have to go to a shop for repair. I've fixed over 100 of these beasts, hope i can ...
light comes on when power on This indicates either one or more of the amps have a failure OR the power supply is being overloaded which is usually also caused by failure in the amplifier. Occasionally
amp lights as does the valve and although the speaker is working. No sound comes out when a guitar is plugged in. I cannot find an internal fuse so it looks like the board has gone. However I would be
amp;#39;t kick on and it just keeps flashing a yellow light as it attempt to power up but seems to get stuck. The main circuit breaker was flipped, and this all started when I reset the circuit. There
light goes on and the speaker switches off. I also use passive monitors with a separate power amp and it clips occasioally,since using da D415 speakers. Plz assist, thanx Check only one active speaker
57 questions posted
Usually answered in minutes!
155 Questions
25 Questions
18 Questions
12 Questions
